|
Universal
Hinged Sensor
The Universal Hinged Sensor is suitable for multiple patient
use with all Mediaid pulse oximeters. It is designed to fit
a wide range of digits from a small finger to the adult great
toe. |
|
Tape
On Sensor
The Tape On Sensor is a reusable sensor designed to fit a
wide range of digits from a small finger to the adult great
toe. It is intended for use on adults and children as young
as age 2. The sensor can be held in place with tape. |
|
Soft
Sensors
Mediaid Soft Sensors are designed for multiple patient use
with all Mediaid pulse oximeters. Soft sensors can be used
for either spot check or long term monitoring. These sensors
tolerate a moderate amount of patient activity. Four types
accommodate a large range of patients from large adults to
children as young as age 2. |
|
Disposable Sensors
These disposable sensor are designed for continuous monitoring and are ideal for single use applications. For use with Mediaid pulse oximeters with an RJ12 Connection |
|
Pediatric
Adjustable Sensor
The Pediatric Adjustable Sensor is a reusable cable and an
adjustable foot wrap. The foot wrap is made of a soft rubber
material and is intended for children 1 month to 18 months
in age. A foot wrap can also be reused several times and may
be sterilized in ethylene oxide. |
|
Earlobe
Sensor
Earlobe Sensor
The Earlobe Sensor is intended for use on patients who have
poor peripheral circulation or when it is not convenient to
use a finger sensor. It is especially useful during treadmill
tests or when patient motion is anticipated.
|
|
R-Adhesive
Sensors
These reusable continuous monitoring sensors ship with 25 adhesives.
|
|
HP
Infrared Printer - Model 82240B
(for
use with Model 130)
Invisible infrared beam links the printer and Model 130 Pulse
Oximeters . No connecting cords to get in your way. Prints
one 24-character line per second. Printer includes paper roll
(2.25 in. x 80 ft. or 5.7 cm x 24 m) and 4 AA alkaline batteries.
(Oximeter not included.)
PN/ REF
POX060-120 |
|
Carrying
Case
(for use with Models: 300,
305, 340)
The black Hip Carry Pouch protects the Model 300, 305, and
340 pulse oximeters. It is made out of denier nylon. The inside
is coated with vinyl. A thick transparent vinyl window allows
the operation of the pulse oximeter without removal from the
pouch. The Hip Carry Pouch can be wiped with water. (Oximeter
not included.)
PN/REF
POX015-300 |
|
Protective
Pouch
(for use with Models: 300,
305, 340)
The royal blue Protection Pouch protects the Model 300, 305,
and 340 pulse oximeters while allowing carrying along small
supplies. It is made out of light cordura material. A thick
transparent vinyl window allows the operation of the pulse
oximeter without removal from the pouch. The Protection Pouch
can be wiped with water. (Oximeter not
included.)
PN/REF
POX015-340 |
|
Protective
Rubber Boot
(for use with Models: 300,
305, 340)
This rubber case protective case allows any Model 300 series
pulse oximeter to withstand tougher situations such as those
encountered in the EMS environment. (Oximeter
not included.)
PN/REF
POX015-320 |
|
Table/Wall
Mount
(for use with Model
300 Series and Model
5300 Series)
Plastic assembly that easily converts to either a desk stand
or wall mount. Made for the 300 and 5300 pulse oximeter series.
(Oximeter not included.)
PN/REF
015-800 |
|
IV
Pole Clamp
(for use with Models: 300,
305, 340)
The IV Pole Clamp holds your pulse oximeter in place. It can
be mounted on an IV pole or on a bed. The IV Pole Clamp is
ideal for your hospital setting. It is made out of flame-retardant
ABS plastic and can be wiped with water or detergent. (Oximeter
not included.)
PN/REF
POX015-750 |
